PVC plastering strip with fabric / protective lip 9 mm / 2,600 mm

PVC plaster strip with fabric / protective lip 9 mm / 2,600 mm, 78 m

Main features short:
Fabric tear strength tested according to ETAG 004
Fabric: alkali-resistant and non-slip
PVC plaster strip with fabric

Hints:
The application recommendations must be observed!

Processing instructions:
Before attaching the PVC plaster strip, fold the protective flap slightly forward and tear approx. 2 to 3 cm at the ends to make it easier to remove the flap later. Thoroughly clean the surface so that it is dry and free of dust and grease. Remove the masking tape and press the foam tape firmly. A protective film can now be attached to the self-adhesive strip of the protective flap to protect the window/door during plastering and painting work. Embed the fabric in the filler, overlap it with the surface reinforcement by at least approx. 10 cm and plaster it in. At the end, remove the protective film and snap off the protective tab of the plastering strip along the predetermined breaking point and pull it off.

Characteristics:
Creates a driving rain-tight (outdoor area) or airtight (indoor area) and flexible connection between the plaster and the window or door frame
Fabric: alkali-resistant and non-slip
PVC profile: plasticiser-free
Fabric tear strength tested according to ETAG 004
PVC plaster strip with fabric 6 mm:. For indoor use only, airtight
PVC plaster strip with fabric 9 mm:. Use primarily in ETICS. Not suitable for large window openings ( 2 m² or edge length 2.5m). Test certificate ift Rosenheim, classification according to DIN EN 12208, class E 1350 according to DIN 18055, stress group C
PVC plaster strip with fabric and protective lip 9 mm:. Protective lip made of TPE to improve the optics. Suitable for ETICS. Not suitable for large window openings ( 2 m² or edge length 2.5m)