Horizontal anchor device MultiLine SK 12, 20 m, 1 piece

Main features short:
Rope shortener and ratchet for controlled rope tightening
To secure a maximum of 2 people
Smallest field 2 m, largest field 20 m

Application areas:
For horizontal securing along a fall edge.
Allows secure movement over a longer distance, up to 20 m possible.

Hints:
For safety reasons, work at heights must always be carried out by two people.
According to DGUV Rules 112 - 198, personal protective equipment against falls must be checked by an expert to ensure that it is in perfect condition as required, but at least once within 12 months. We offer you this component testing.
The user must carry out a visual inspection before each use. If there are defects, the PPE must be withdrawn from use immediately.
Further information can be found at bti.de/fallsicherung
Further information at bti.de/mas
Further information at bti.de/pruefservice

Characteristics:
Horizontal anchorage device according to Type B and Type C according to EN 795
Connects at least 2 individual anchor points together for secure movement along the rope
Fastening points available on site must comply with EN 795 and the object must also have a minimum strength of 22 kN.
12 mm kernmantle rope with a permanently connected rope clamp and tensioning device
Rope shorteners and ratchets enable the rope to be tightened in a controlled manner
Personal lanyard is attached to the movable guide
To secure a maximum of 2 people
Maximum field length: 20 m (no additional snap hooks are necessary for intermediate bracing)
Minimum field length: 2 m
Minimum distance to the edge: 2.5 m
Horizontal inclination up to a maximum of 15° permitted
For corners up to max. 90°
The free space below the user must be at least 3.5 m; the free space of the fall arrest system used must also be taken into account

Language

Language

fall protection

Filters

Language

Language

Compare products