Multi-composite system MCS Diamond 585ml
SKU 143505
Multi-composite system MCS Diamond 585ml, 1 KTU
Main features short:
Pure epoxy resin mortar for highest bond tension and load data in concrete
Long processing times enable high setting depths and diameters, even at higher temperatures
High bond tension ensures secure anchoring, even with diamond-drilled holes
Application areas:
For the approved anchoring of, for example, railings, steel structures, high racks, soundproof walls in cracked and non-cracked concrete C20/25 to C50/60, as well as subsequent reinforcement connections.
Also suitable for natural stone with a dense structure
Product advantages:
Approved for hammer and diamond drilled holes
European technical approval option 1 for cracked and non-cracked concrete with anchor rods MCS Plus A from M8 - M30 as well as commercially available threaded rods with 3.1 factory test certificate
ETA approval for use in earthquake zones with seismic performance categories C1 and C2
European technical approval for reinforcement connections from Ø 8 - 40 mm and fire protection tested R180
Due to extended processing times, it is particularly suitable for series assembly and reinforcement connections
Highest loads thanks to the very good adhesive properties of the composite mortar
High level of application safety as the composite mortar bonds the anchor to the borehole wall over the entire surface and seals the borehole
The optimized cartridge allows larger and deeper boreholes to be injected with a large volume flow
Pure epoxy resin makes underwater use possible under extreme conditions
High-quality 2-component composite mortar based on epoxy resin
Hints:
For further technical data and information, the approval is available on the Berner online site and/or use the Berner design software
The product falls under the Chemicals Prohibition Ordinance. All information about delivery can be found in our online shop at www.berner.de/CVV
Main features short:
Pure epoxy resin mortar for highest bond tension and load data in concrete
Long processing times enable high setting depths and diameters, even at higher temperatures
High bond tension ensures secure anchoring, even with diamond-drilled holes
Application areas:
For the approved anchoring of, for example, railings, steel structures, high racks, soundproof walls in cracked and non-cracked concrete C20/25 to C50/60, as well as subsequent reinforcement connections.
Also suitable for natural stone with a dense structure
Product advantages:
Approved for hammer and diamond drilled holes
European technical approval option 1 for cracked and non-cracked concrete with anchor rods MCS Plus A from M8 - M30 as well as commercially available threaded rods with 3.1 factory test certificate
ETA approval for use in earthquake zones with seismic performance categories C1 and C2
European technical approval for reinforcement connections from Ø 8 - 40 mm and fire protection tested R180
Due to extended processing times, it is particularly suitable for series assembly and reinforcement connections
Highest loads thanks to the very good adhesive properties of the composite mortar
High level of application safety as the composite mortar bonds the anchor to the borehole wall over the entire surface and seals the borehole
The optimized cartridge allows larger and deeper boreholes to be injected with a large volume flow
Pure epoxy resin makes underwater use possible under extreme conditions
High-quality 2-component composite mortar based on epoxy resin
Hints:
For further technical data and information, the approval is available on the Berner online site and/or use the Berner design software
The product falls under the Chemicals Prohibition Ordinance. All information about delivery can be found in our online shop at www.berner.de/CVV
