Fire protection foam set S90 PF-C

Fire protection foam set S90 PF-C, 1 DOS

Main features short:
High foam yield of approx. 35 l per can
Adapts to unfavorable geometries

Application areas:
Walls made of masonry, concrete, aerated concrete and lightweight partition walls in post-and-beam design; Concrete, reinforced concrete or aerated concrete ceilings. . bulkhead sizes walls:. Minimum component thickness 10 cm. Bulkhead thickness 20 cm. Max bulkhead size 20 x 20 cm. or. Minimum component thickness 10 cm. Bulkhead thickness 22 cm. Max. bulkhead size 20 x 50 cm (H x W). . bulkhead sizes ceilings:. Minimum component thickness 15 cm. Bulkhead thickness 20 cm. Max bulkhead size 20 x 20 cm

Hints:
More information at www.bti.de/brandschutz

Processing instructions:
Coat cables / lines in the partition area, 250 mm in front of and behind the partition with a thickness of at least 1 mm with Coating S90 PF-E. Seal the shell opening with S90 PF-C foam. After curing, cut off the protruding foam flush. Final coat of coating over the partition surface and at least 80 mm over the adjacent wall surface (d = 1 mm). Attach identification plate.

Characteristics:
Very economical, high foam yield of approx. 35 l per can
Dust and fiber free
Also adapts to unfavorable geometries and fills the bulkhead tightly
High stability, there is no need for formwork aids
Shelf life:. Foam: 12 months. Coating: 6 months
The general type approval Z-19.53-2332 must be observed for the approval-compliant and safe design