Screw anchor MMS-plus SS 7.5 x 40 SW 10 zi
SKU 9089474-100
Screw anchor MMS-plus SS 7.5 x 40 SW 10 zi, 100 pieces
Main features short:
Hexagonal head with pressed washer and head embossing
galvanized steel
Assembly time reduction
Application areas:
suspended ceilings, metal structures, wooden structures, beams, pipes, ventilation ducts, consoles, railings, supports, stairs, facades
Characteristics:
Assembly time reduction. Low anchoring depths. Small drilling diameters. Machine processing
galvanized steel
Hexagonal head with pressed washer and head embossing
Optimized concrete thread with a larger outside diameter for more effective area
Functional tip with reinforced teeth for low screw-in torques and less wear. Low screw-in torques – no specified torques, so processing possible without a torque wrench. Expansion pressure-free connection that can be dismantled at any time
Approval/Evaluation. ETA-15/0784 - Anchoring in cracked and non-cracked concrete. Approved for use under seismic actions C1 (Ø 10 mm, 12 mm, 16 mm and 20 mm only). Approved for use under seismic actions C2 (Ø 16 mm and 20 mm only). Fire exposure for all sizes. Z-21.8-2061 for multiple use for temporary fastenings in young concrete (only Ø 10 mm and 12 mm). ETA-15/0785 for use in concrete for redundant non-load-bearing systems (prestressed hollow core ceilings Ø 6; 7.5; 10mm)
The entire approval notice must be observed for the application/measurement
Main features short:
Hexagonal head with pressed washer and head embossing
galvanized steel
Assembly time reduction
Application areas:
suspended ceilings, metal structures, wooden structures, beams, pipes, ventilation ducts, consoles, railings, supports, stairs, facades
Characteristics:
Assembly time reduction. Low anchoring depths. Small drilling diameters. Machine processing
galvanized steel
Hexagonal head with pressed washer and head embossing
Optimized concrete thread with a larger outside diameter for more effective area
Functional tip with reinforced teeth for low screw-in torques and less wear. Low screw-in torques – no specified torques, so processing possible without a torque wrench. Expansion pressure-free connection that can be dismantled at any time
Approval/Evaluation. ETA-15/0784 - Anchoring in cracked and non-cracked concrete. Approved for use under seismic actions C1 (Ø 10 mm, 12 mm, 16 mm and 20 mm only). Approved for use under seismic actions C2 (Ø 16 mm and 20 mm only). Fire exposure for all sizes. Z-21.8-2061 for multiple use for temporary fastenings in young concrete (only Ø 10 mm and 12 mm). ETA-15/0785 for use in concrete for redundant non-load-bearing systems (prestressed hollow core ceilings Ø 6; 7.5; 10mm)
The entire approval notice must be observed for the application/measurement
