Impact anchor EM 6

Impact anchor EM 6, 100 pieces

Main features short:
No depth limitation required due to cone
Drop-in anchor with internal thread for pre-positioned installation
For use as (redundant) multiple fastening of non-load-bearing systems in cracked concrete

Application areas:
In concrete = C20 / 25 (= B25), in pressure-resistant natural stone (without approval); A4 stainless steel suitable for damp rooms, industrial atmospheres, near the sea, outdoors; Galvanized steel and A4 not suitable for wet rooms in chlorine-containing atmospheres (e.g. indoor swimming pools); For fire protection requirements, screws and threaded rods with a minimum strength of 5.6 or A4 must be used

Processing instructions:
Choose the correct drilling diameter, drill the drill hole with a depth stop to the required setting depth and clean the drill hole. Insert the dowel and spread it with the appropriate BTI impact tool. Fasten the connecting part with a screw or threaded bolt (note the torque).

Characteristics:
Improved two-stage expansion cone. High load capacities with small edge and center distances, easy assembly and high functional reliability thanks to low impact energy
For anchoring in uncracked concrete (pressure zone)
For use as multiple fastening of non-load-bearing systems in concrete
The entire approval notice must be observed for the application/measurement