Deep primer ready to use, 10l
SKU 9080479
Deep primer ready to use, 10l, 1 EIM
Main features short:
High penetration depth and insulating effect
Strengthens, crumbly and sandy plaster
Concrete surfaces and cement-bound substrates
Application areas:
For indoor and outdoor
Hints:
Consumption: approx. 150 – 200 ml/m². Fluctuates depending on the nature and absorbency of the surface. Determine object-specific needs and required dilution on test areas.
Processing instructions:
The surface must be stable and free of grease, oil and dust. Cracks must be repaired beforehand. Loose old paint or plaster parts must be removed before application. It is applied undiluted by brushing, rolling or spraying. At temperatures of +20 °C, further coatings/paints are possible after approx. 12 hours (depending on the surface and humidity). For highly absorbent surfaces, 2 coats wet on wet are recommended. The surface must not be shiny after applying the deep primer. Clean tools with water immediately after use. The information may be subject to fluctuations due to different conditions on the construction site. The processor must check the suitability of the product through samples and tests.
Characteristics:
High penetration depth and insulating effect
Strengthens, crumbly and sandy plaster
Concrete surfaces and cement-bound substrates
Suitable for limestone, clinker brickwork and laminated plasterboard
Low odor nuisance, also suitable for indoor use
For pre-treating old emulsion paints before repainting with emulsion paints
Main features short:
High penetration depth and insulating effect
Strengthens, crumbly and sandy plaster
Concrete surfaces and cement-bound substrates
Application areas:
For indoor and outdoor
Hints:
Consumption: approx. 150 – 200 ml/m². Fluctuates depending on the nature and absorbency of the surface. Determine object-specific needs and required dilution on test areas.
Processing instructions:
The surface must be stable and free of grease, oil and dust. Cracks must be repaired beforehand. Loose old paint or plaster parts must be removed before application. It is applied undiluted by brushing, rolling or spraying. At temperatures of +20 °C, further coatings/paints are possible after approx. 12 hours (depending on the surface and humidity). For highly absorbent surfaces, 2 coats wet on wet are recommended. The surface must not be shiny after applying the deep primer. Clean tools with water immediately after use. The information may be subject to fluctuations due to different conditions on the construction site. The processor must check the suitability of the product through samples and tests.
Characteristics:
High penetration depth and insulating effect
Strengthens, crumbly and sandy plaster
Concrete surfaces and cement-bound substrates
Suitable for limestone, clinker brickwork and laminated plasterboard
Low odor nuisance, also suitable for indoor use
For pre-treating old emulsion paints before repainting with emulsion paints