Burn-up barrier, concentrate, 15 kg, ochre

Aufbrennsperre, concentrate, 15 kg, ocher, 15 KG

Main features short:
Solvent-free
Prevents burn-up
No filmmaker

Application areas:
For indoor and outdoor

Hints:
The concentrate still has to be diluted on site!

Processing instructions:
Concentrate: The substrate must be stable and free of grease, oil and dust. The surface should be air dry with no damp spots. Moisture acting on the back must be ruled out. Depending on the absorbency of the substrate, dilute 1:3 to 1:8 with water and apply with a brush or roller. The dilution is to be adjusted so that a surface primed with Aufbrennsperre does not shine. Dilutions between 1:3 and 1:5 are recommended for highly absorbent substrates. Less absorbent materials should be treated with dilutions between 1:5 and 1:8. Aufbrennsperre must be dry before applying the plaster. Depending on the weather, plaster after 1 to 3 days. Clean tools with water immediately after use. Areas not to be treated must be protected. Wash off splashes immediately with water. Glass, metal, clinker, window frames, etc. are attacked by the fire barrier. Due to different conditions on the construction site, the information may be subject to fluctuations. The processor must check the suitability of the product by means of samples and trials.

Characteristics:
No film former, therefore no limitation of water vapor diffusion
Burning of subsequently applied plaster is prevented
Formation of shrinkage cracks is restricted