Multi-primer, black, 5 l

Multi-Primer, black, 5 liters, 1 bucket

Main features short:
Easy to use adhesion promoter for butyl and bitumen tapes
Works on absorbent and smooth surfaces
Use sparingly with a brush

Application areas:
On various common building surfaces, e.g. E.g. plaster, concrete, aerated concrete, brick, sand-lime brick, hard PVC and various metal sheets

Processing instructions:
The surface must not be oxidized and must be dry, clean, smooth, stable, free of loose components and free of dust, grease, ice, frost and dew. Beforehand, you should check whether the surface is compatible with Multi-Primer. Stir/shake Multi-Primer vigorously before processing. It is ready to use and must not be diluted or mixed with other products. Apply Multi-Primer evenly and over the entire surface in one go using a roller or brush; it is not sprayable. Before attaching the tapes, the primer must be allowed to dry or flash off, ie the primer must no longer rub off on contact. It is absolutely necessary to check the dryness before installing the belt. To do this, stick a small strip of tape onto the primer, press it down and tear it off again. If the primer comes off the surface, there is still insufficient adhesion. The adhesion is sufficient if the tape can only be removed from the surface with great effort.

Characteristics:
Filled ready for processing
Open-pored and rough substrates are solidified
Ensures optimal adhesion on a variety of surfaces