Carbide cutting disc universal set of 3 Ø 115

Carbide cutting disc universal set of 3 Ø 115, 1 SOR

Main features short:
Very long service life
No more changing discs
Quick cuts

Application areas:
Hard/soft wood, wood with nails, plywood, chipboard, MDF, gypsum and gypsum fiber boards, plastic, e.g. cable ducts, pipes, copper

Hints:
The bore of the diamond cutting disc must match the diameter of the machine holder; Discs with unbalance or lateral runout lead to strong vibrations and must not be installed; The flanges and the cutting disc shaft must be absolutely clean of rust, saw sludge, etc. It is advisable to clean them from time to time with fine emery cloth; The cutting disc must always be attached to the shaft adapter or the cutting disc holder seat of the machine, but must never be attached to the thread; The contact surface of the flanges must be free of burrs and notches, as this would cause a lateral runout in the disc when clamped. If necessary, the flange should be equalized with a fine file; The arrow on the disc shows the direction of rotation;
Further information at www.bti.de/dividing disks

Processing instructions:
Do not apply strong pressure, only work with the machine's own weight
Do not tilt or jam the cutting discs
Observe the correct number of revolutions according to the machine manufacturer's instructions
Wear safety glasses and hearing protection

Characteristics:
Quick cuts. Thin disc for high cutting speed
No more changing discs. A wide variety of materials can be cut with one tool
Very long service life. High-quality cutting edge using laser melting process
Easy handling

Scope of delivery:
Set of 4 Ø 76 (item no.: 9 089452). 4 HM cutting disc universal Ø 76 (item no.: 9 085304)
Set of 3 Ø 115 (item no.: 9 089453). 3 HM cutting disc universal Ø 115 (item no.: 9 088569)
Set of 3 Ø 125 (item no.: 9 089423). 3 HM cutting disc universal Ø 125 (item no.: 9 088570)
Set of 6 Ø 125 (item no.: 9 094492). 6 HM cutting disc universal Ø 125 (item no.: 9 088570)