Flex tape adhesive 600 ml
SKU 55246
Original price
€7,07
-
Original price
€75,33
Original price
Logge dich ein, um Preise zu sehen
Current price
Logge dich ein, um Preise zu sehen
Flex tape adhesive 600 ml, 1 BEU
Main features short:
Thanks to its very good stability, “overhead work” is also possible
No separate primer, the base coat is made from flexible tape adhesive
Application areas:
For bonding Flexband Uni inside and outside to create an airtight layer between the window and the masonry
Product advantages:
Thanks to its very good stability, “overhead work” is also possible
No separate primer, the base coat is made from flexible tape adhesive
UV-resistant, paintable, low-odor, solvent-free, permanently elastic after curing, very good adhesion to all common building surfaces such as concrete, plaster, masonry, cement and wood, as well as to building elements such as window frames and window sills
Hints:
Skin formation: approx. 10 – 15 minutes depending on temperature, humidity and surface
Curing: approx. 2-3 mm/day
Processing temperature: + 5 ºC to + 50 ºC component temperature
Test report P5636, Polymer Institute The substrates must be solid, load-bearing, free of dust, grease and oil, and free of ice and frost.
Please note our safety and technical data sheet
Processing instructions:
Apply in serpentine lines with an 8 – 10 mm thick bead. The serpentine lines ensure broader adhesion of the tape and avoid “hollow spots”
For porous and absorbent surfaces, a primer consisting of 1 part flexible tape adhesive and 3 parts water is recommended
Place the band in a loop and press firmly (do not flatten)
The bonding is only fully resilient once it has completely dried. Exposure to rain and moisture can affect the adhesive strength.
Main features short:
Thanks to its very good stability, “overhead work” is also possible
No separate primer, the base coat is made from flexible tape adhesive
Application areas:
For bonding Flexband Uni inside and outside to create an airtight layer between the window and the masonry
Product advantages:
Thanks to its very good stability, “overhead work” is also possible
No separate primer, the base coat is made from flexible tape adhesive
UV-resistant, paintable, low-odor, solvent-free, permanently elastic after curing, very good adhesion to all common building surfaces such as concrete, plaster, masonry, cement and wood, as well as to building elements such as window frames and window sills
Hints:
Skin formation: approx. 10 – 15 minutes depending on temperature, humidity and surface
Curing: approx. 2-3 mm/day
Processing temperature: + 5 ºC to + 50 ºC component temperature
Test report P5636, Polymer Institute The substrates must be solid, load-bearing, free of dust, grease and oil, and free of ice and frost.
Please note our safety and technical data sheet
Processing instructions:
Apply in serpentine lines with an 8 – 10 mm thick bead. The serpentine lines ensure broader adhesion of the tape and avoid “hollow spots”
For porous and absorbent surfaces, a primer consisting of 1 part flexible tape adhesive and 3 parts water is recommended
Place the band in a loop and press firmly (do not flatten)
The bonding is only fully resilient once it has completely dried. Exposure to rain and moisture can affect the adhesive strength.