Flat roof adhesive foam 800ml
SKU 408413
Original price
€13,32
-
Original price
€145,49
Original price
Logge dich ein, um Preise zu sehen
€13,32
-
Logge dich ein, um Preise zu sehen
Current price
Logge dich ein, um Preise zu sehen
Flat roof adhesive foam 800ml, 1 piece
Main features short:
Tested wind suction stability of the system
Tested and approved according to ETAG 006
Fast, easy and reliable bonding
Application areas:
Developed for the wind-absorbing bonding of thermal insulation materials made of polystyrene, polyurethane and phenolic resin rigid foam to rafters, trapezoidal sheets, concrete, masonry and wood materials in flat roof areas
Bonding of fleece-laminated plastic or elastomer roof and sealing tarpaulins to thermal insulation panels, concrete, intact, ground bitumen membranes and wood materials in flat roof areas
Product advantages:
Extremely efficient process for bonding flat roof panels. Quick and easy application without electricity or water. Verified wind suction stability of the system. Ensures long-term connections
Excellent product performance. Short curing time. High resistance to aging. High foam yield for efficient work
Certified high quality. Tested and approved according to ETAG 006. Fire protection class B1. EC1 Plus certified
Hints:
Freshly applied foam can be removed immediately with the PU universal cleaner
Hardened foam can only be removed mechanically or with the PU Foam Fighter
In cold temperatures, allow the foam to sit at room temperature for at least an hour before use
Please note that from August 24, 2023, appropriate training on the safe handling of diisocyanates must be completed before use. Further information about training can be found at
Processing instructions:
The adhesive surfaces must be clean and free of grease and oil
Lightly moisten the surfaces with a spray bottle (by spraying)
The subsurface analysis must be carried out in accordance with current regulations. The surface must be stable, dry, clean, firm and level.
In strong winds, it is important to ensure that the lightweight flat roof adhesive does not contaminate surrounding objects, components or people
Screw the can firmly onto the gun thread and shake about 20 times with the gun held down. If there are longer interruptions, repeat the shaking process
When dispensing the adhesive, hold the gun as vertically as possible to maintain a distance of 1-2 cm between the gun nozzle and the substrate
Depending on the temperature and humidity, the insulation board or roofing membrane should be applied within 8 minutes and pushed firmly into the correct position
Repositioning the insulation board or unrolling the roofing membranes should be avoided, as this destroys the adhesive structure and greatly reduces the adhesive strength
In strong winds, the panels must be weighed down with a suitable weight. For trapezoidal steel roofs, the adhesive beads must always be applied to the top of the top cord.
At least 3 even adhesive beads with a diameter of at least 30 mm are required per m² of adhesive surface. The number of adhesive beads depends on the height of the building, the roof area, the edge and the corner area and depends on the region (wind zone) and the materials to be bonded
The correction period of the adhesive is approximately 10 minutes. This time may vary depending on the temperature and humidity range
Main features short:
Tested wind suction stability of the system
Tested and approved according to ETAG 006
Fast, easy and reliable bonding
Application areas:
Developed for the wind-absorbing bonding of thermal insulation materials made of polystyrene, polyurethane and phenolic resin rigid foam to rafters, trapezoidal sheets, concrete, masonry and wood materials in flat roof areas
Bonding of fleece-laminated plastic or elastomer roof and sealing tarpaulins to thermal insulation panels, concrete, intact, ground bitumen membranes and wood materials in flat roof areas
Product advantages:
Extremely efficient process for bonding flat roof panels. Quick and easy application without electricity or water. Verified wind suction stability of the system. Ensures long-term connections
Excellent product performance. Short curing time. High resistance to aging. High foam yield for efficient work
Certified high quality. Tested and approved according to ETAG 006. Fire protection class B1. EC1 Plus certified
Hints:
Freshly applied foam can be removed immediately with the PU universal cleaner
Hardened foam can only be removed mechanically or with the PU Foam Fighter
In cold temperatures, allow the foam to sit at room temperature for at least an hour before use
Please note that from August 24, 2023, appropriate training on the safe handling of diisocyanates must be completed before use. Further information about training can be found at
Processing instructions:
The adhesive surfaces must be clean and free of grease and oil
Lightly moisten the surfaces with a spray bottle (by spraying)
The subsurface analysis must be carried out in accordance with current regulations. The surface must be stable, dry, clean, firm and level.
In strong winds, it is important to ensure that the lightweight flat roof adhesive does not contaminate surrounding objects, components or people
Screw the can firmly onto the gun thread and shake about 20 times with the gun held down. If there are longer interruptions, repeat the shaking process
When dispensing the adhesive, hold the gun as vertically as possible to maintain a distance of 1-2 cm between the gun nozzle and the substrate
Depending on the temperature and humidity, the insulation board or roofing membrane should be applied within 8 minutes and pushed firmly into the correct position
Repositioning the insulation board or unrolling the roofing membranes should be avoided, as this destroys the adhesive structure and greatly reduces the adhesive strength
In strong winds, the panels must be weighed down with a suitable weight. For trapezoidal steel roofs, the adhesive beads must always be applied to the top of the top cord.
At least 3 even adhesive beads with a diameter of at least 30 mm are required per m² of adhesive surface. The number of adhesive beads depends on the height of the building, the roof area, the edge and the corner area and depends on the region (wind zone) and the materials to be bonded
The correction period of the adhesive is approximately 10 minutes. This time may vary depending on the temperature and humidity range