Safety set "Scaffolding", strap size 0 (42 - 50)
SKU 9096817
Original price
€22.383,70
-
Original price
€22.383,70
Original price
Logge dich ein, um Preise zu sehen
€22.383,70
-
Logge dich ein, um Preise zu sehen
Current price
Logge dich ein, um Preise zu sehen
"Scaffolding" safety set, belt size 0 (42 - 50), 1 ST
Main features short:
Specially compiled for the requirements of scaffolding
Permitted maximum length of the lanyard of 2.5 m
Easier attachment to the rear attachment point
Application areas:
Especially suitable for use in scaffolding
When working at height there is a risk of falling
For securing to anchor points above the head or behind the body
Hints:
Prescribed maximum length in scaffolding: 2.5 m fasteners.
The 0.5 m length of the attachment eyelet extension B3 must be taken into account when calculating the length of the lanyard.
Important to note: Stability of the scaffolding (possible impact forces of 6 kN); Observe the assembly and usage instructions of the scaffolding manufacturer; only use approved attachment points on the scaffolding; the lanyard must always be fixed 1 m above the stand; Clear height: 5.75 m below the user (3rd decking level = approx. 6 m height); no edge stress on the carabiner, only axial load.
Only eyelets marked with "A" may be used as a fall arrest eyelet. The securing lanyard may only be hooked in there.
For safety reasons, work at heights must always be carried out by two people.
According to DGUV Rules 112 - 198, personal protective equipment against falls must be checked by an expert to ensure that it is in perfect condition as required, but at least once every 12 months. We offer you this component test.
Before each use, a visual inspection must be carried out by the user. In the event of defects, the PPE must be withdrawn from use immediately.
From a height of 1.90 m, we recommend harness size 2.
Size table at bti.de/en/size-table-safety-harnesses
Further information at bti.de/fall protection
Further information at bti.de/mas
Further information at bti.de/pruefservice
Characteristics:
MAS 5 harness. Rear attachment point. Ergonomic fit, size adjustable. Strong, stable webbing, all seams secured 3 times, extremely hard-wearing polyester thread
Including permanently attached B3 lanyard, length 0.5 m. Makes it easier for the wearer to attach to the rear attachment point. Securing lanyard attaches to loop of B3
Lanyard BFD 5. 12 mm strong kernmantle rope, length 2 m. Including energy absorber to absorb the impact forces in the event of a fall. One-hand carabiner on the shock absorber strap for attachment to the fall arrest eyelet. Large pipe hook at the end of the rope for attachment to the scaffolding
Supplied in BTI Box 1. Dry and UV-resistant storage. Stackable for easier transport. Clean and fully dry equipment before storing
Net weight: harness 1700g, lanyard with shock absorber 1200g
Up to max. 100 kg body weight
PPE category 3, EN 361 (harness), EN 354 (integrated lanyard B3), EN 354 + 355 (energy absorber lanyard)
Scope of delivery:
1 safety harness MAS 5 (EN 361) including attachment eyelet extension B3 (EN 354)
1 energy absorbing lanyard MAS BFD 5, length 2 m (EN 354 + 355)
1 BTI Box 1 (dry and UV-resistant storage)
Main features short:
Specially compiled for the requirements of scaffolding
Permitted maximum length of the lanyard of 2.5 m
Easier attachment to the rear attachment point
Application areas:
Especially suitable for use in scaffolding
When working at height there is a risk of falling
For securing to anchor points above the head or behind the body
Hints:
Prescribed maximum length in scaffolding: 2.5 m fasteners.
The 0.5 m length of the attachment eyelet extension B3 must be taken into account when calculating the length of the lanyard.
Important to note: Stability of the scaffolding (possible impact forces of 6 kN); Observe the assembly and usage instructions of the scaffolding manufacturer; only use approved attachment points on the scaffolding; the lanyard must always be fixed 1 m above the stand; Clear height: 5.75 m below the user (3rd decking level = approx. 6 m height); no edge stress on the carabiner, only axial load.
Only eyelets marked with "A" may be used as a fall arrest eyelet. The securing lanyard may only be hooked in there.
For safety reasons, work at heights must always be carried out by two people.
According to DGUV Rules 112 - 198, personal protective equipment against falls must be checked by an expert to ensure that it is in perfect condition as required, but at least once every 12 months. We offer you this component test.
Before each use, a visual inspection must be carried out by the user. In the event of defects, the PPE must be withdrawn from use immediately.
From a height of 1.90 m, we recommend harness size 2.
Characteristics:
MAS 5 harness. Rear attachment point. Ergonomic fit, size adjustable. Strong, stable webbing, all seams secured 3 times, extremely hard-wearing polyester thread
Including permanently attached B3 lanyard, length 0.5 m. Makes it easier for the wearer to attach to the rear attachment point. Securing lanyard attaches to loop of B3
Lanyard BFD 5. 12 mm strong kernmantle rope, length 2 m. Including energy absorber to absorb the impact forces in the event of a fall. One-hand carabiner on the shock absorber strap for attachment to the fall arrest eyelet. Large pipe hook at the end of the rope for attachment to the scaffolding
Supplied in BTI Box 1. Dry and UV-resistant storage. Stackable for easier transport. Clean and fully dry equipment before storing
Net weight: harness 1700g, lanyard with shock absorber 1200g
Up to max. 100 kg body weight
PPE category 3, EN 361 (harness), EN 354 (integrated lanyard B3), EN 354 + 355 (energy absorber lanyard)
Scope of delivery:
1 safety harness MAS 5 (EN 361) including attachment eyelet extension B3 (EN 354)
1 energy absorbing lanyard MAS BFD 5, length 2 m (EN 354 + 355)
1 BTI Box 1 (dry and UV-resistant storage)