Tacolit Turbo, white, 290 ml
SKU 9097687
Tacolit Turbo, white, 290 ml, 1 KTU
Main features short:
Fast curing
Adhesion to almost all materials
Weatherproof
Application areas:
For quick bonding in the construction and metal industries, hand-tight within a few minutes
Hints:
Further information at www.bti.de/klebeberater
Processing instructions:
The adhesive surfaces must be clean, stable and free of grease and dust. Apply the adhesive beads thinly and vertically-parallel with a minimum distance of 12 cm (about one hand's width) to enable rapid curing. Press the materials together as tightly as possible. If necessary, additionally secure the materials to be bonded mechanically. Curing between two airtight substrates is slowed down. Only bond PMMA and PC without tension. Before each application, carry out individual preliminary tests on the adhesion and load-bearing capacity of the bond.
Characteristics:
Very fast curing
Excellent adhesion to wood, stone, concrete, natural stone, plasterboard, PVC, polystyrene, polyester, PMMA, PC, ABS, polyamide, epoxy GRP, many hard plastics, metals and alloys, steel, galvanized steel, zinc, aluminum, stainless steel, and slightly damp surfaces.
Permanently elastic, waterproof, seawater resistant, aging and UV resistant, moisture and weather resistant
Free from solvents, isocyanates and silicone
Non-corrosive in combination with metals
No adhesion to bitumen, PE, PP, PTFE or silicone
Main features short:
Fast curing
Adhesion to almost all materials
Weatherproof
Application areas:
For quick bonding in the construction and metal industries, hand-tight within a few minutes
Hints:
Further information at
Processing instructions:
The adhesive surfaces must be clean, stable and free of grease and dust. Apply the adhesive beads thinly and vertically-parallel with a minimum distance of 12 cm (about one hand's width) to enable rapid curing. Press the materials together as tightly as possible. If necessary, additionally secure the materials to be bonded mechanically. Curing between two airtight substrates is slowed down. Only bond PMMA and PC without tension. Before each application, carry out individual preliminary tests on the adhesion and load-bearing capacity of the bond.
Characteristics:
Very fast curing
Excellent adhesion to wood, stone, concrete, natural stone, plasterboard, PVC, polystyrene, polyester, PMMA, PC, ABS, polyamide, epoxy GRP, many hard plastics, metals and alloys, steel, galvanized steel, zinc, aluminum, stainless steel, and slightly damp surfaces.
Permanently elastic, waterproof, seawater resistant, aging and UV resistant, moisture and weather resistant
Free from solvents, isocyanates and silicone
Non-corrosive in combination with metals
No adhesion to bitumen, PE, PP, PTFE or silicone
