Tacolit Flex PU, gray, 300ml
SKU 9095983
Original price
€5,52
-
Original price
€66,58
Original price
Logge dich ein, um Preise zu sehen
Current price
Logge dich ein, um Preise zu sehen
Tacolit Flex PU, gray, 300ml, 1 KTU
Main features short:
Highly elastic professional adhesive and sealant
Can be sanded after hardening
Compatible with the 4F waterproofing system
Application areas:
For a wide range of bonding and jointing in the construction and metal industries; also suitable for dynamically stressed, vibrating constructions and highly stressed expansion joints; Compatible with the 4F flat roof waterproofing system
Hints:
Further information at www.bti.de/klebeberater
Processing instructions:
The adhesive surfaces must be clean, stable, free of grease and dust and dry. Apply the adhesive beads vertically-parallel with a minimum distance of 5 cm (about 2 thumbs wide) to enable rapid curing. When pressing, maintain an adhesive gap of at least 2 mm. If necessary, additionally secure or clamp the materials to be bonded mechanically. When grouting, smooth the joints with BTI smoothing agent before the skin forms. Before each application, carry out individual preliminary tests on the adhesion and load-bearing capacity of the bond.
Pre-treat porous substrates with Primer S 100. Alkyd resin paints may experience a delay in the drying of the paint
Own experiments required.
Characteristics:
CE marking. Joint sealant for facade elements EN 15651-1: F-EXT-INT 25 HM. Joint sealant for pedestrian paths EN 15651-4: PW-EXT-INT-CC 25HM
Excellent adhesion to all substrates and metals commonly found in construction
Compatible adhesive and sealant in conjunction with 1K-PUR liquid seals, such as the BTI 4F system
Permanently elastic, tension-balancing, moisture- and weather-resistant
Good chemical resistance
Free of silicone
Non-corrosive in combination with metals
Can be sanded after hardening
Paint compatible*
Can be painted over*
No adhesion to bitumen, PE, PP, PTFE or silicones
Main features short:
Highly elastic professional adhesive and sealant
Can be sanded after hardening
Compatible with the 4F waterproofing system
Application areas:
For a wide range of bonding and jointing in the construction and metal industries; also suitable for dynamically stressed, vibrating constructions and highly stressed expansion joints; Compatible with the 4F flat roof waterproofing system
Hints:
Further information at
Processing instructions:
The adhesive surfaces must be clean, stable, free of grease and dust and dry. Apply the adhesive beads vertically-parallel with a minimum distance of 5 cm (about 2 thumbs wide) to enable rapid curing. When pressing, maintain an adhesive gap of at least 2 mm. If necessary, additionally secure or clamp the materials to be bonded mechanically. When grouting, smooth the joints with BTI smoothing agent before the skin forms. Before each application, carry out individual preliminary tests on the adhesion and load-bearing capacity of the bond.
Pre-treat porous substrates with Primer S 100. Alkyd resin paints may experience a delay in the drying of the paint
Own experiments required.
Characteristics:
CE marking. Joint sealant for facade elements EN 15651-1: F-EXT-INT 25 HM. Joint sealant for pedestrian paths EN 15651-4: PW-EXT-INT-CC 25HM
Excellent adhesion to all substrates and metals commonly found in construction
Compatible adhesive and sealant in conjunction with 1K-PUR liquid seals, such as the BTI 4F system
Permanently elastic, tension-balancing, moisture- and weather-resistant
Good chemical resistance
Free of silicone
Non-corrosive in combination with metals
Can be sanded after hardening
Paint compatible*
Can be painted over*
No adhesion to bitumen, PE, PP, PTFE or silicones