Tacolit inside, white, 310 ml
SKU 9002762
Original price
€4,63
-
Original price
€55,58
Original price
Logge dich ein, um Preise zu sehen
Current price
Logge dich ein, um Preise zu sehen
Tacolit inside, white, 310 ml, 1 KTU
Main features short:
Water-based, hard professional assembly adhesive
High initial adhesion with light, absorbent workpieces
Fresh adhesive removable with water
Application areas:
For direct bonding of many materials with high initial adhesion for light workpieces in the construction industry; Suitable for absorbent indoor surfaces on even and uneven surfaces
Hints:
More information at www.bti.de/klebeberater
Processing instructions:
The adhesive surfaces must be clean, stable, free of grease and dust and dry. At least one of the surfaces to be bonded must be absorbent. When gluing flat surfaces, apply the adhesive beads vertically and parallel with a minimum distance of 5 cm (about 2 thumbs wide) to enable fast curing. Then press the surfaces together immediately or tap them with a rubber mallet. If necessary, additionally secure or clamp the materials to be bonded mechanically. Before each application, carry out individual preliminary tests on the adhesion and the load-bearing capacity of the bond. Uncured adhesive can be removed from many surfaces and tools with water.
Characteristics:
High initial adhesion, no need to fix the materials to be bonded during curing
Excellent adhesion to all substrates commonly used in construction, such as wood, stone, concrete, plasterboard, gypsum, plaster, many plastics, wall tiles and metals
Moisture-resistant after hardening and can be painted over with water-soluble paints
Free from solvents, isocyanates and silicone
Odorless
Non-corrosive in contact with metals
Sandable after hardening
Can be painted over with emulsion paints
No adhesion to bitumen, PE, PP, PTFE or silicone
Main features short:
Water-based, hard professional assembly adhesive
High initial adhesion with light, absorbent workpieces
Fresh adhesive removable with water
Application areas:
For direct bonding of many materials with high initial adhesion for light workpieces in the construction industry; Suitable for absorbent indoor surfaces on even and uneven surfaces
Hints:
More information at
Processing instructions:
The adhesive surfaces must be clean, stable, free of grease and dust and dry. At least one of the surfaces to be bonded must be absorbent. When gluing flat surfaces, apply the adhesive beads vertically and parallel with a minimum distance of 5 cm (about 2 thumbs wide) to enable fast curing. Then press the surfaces together immediately or tap them with a rubber mallet. If necessary, additionally secure or clamp the materials to be bonded mechanically. Before each application, carry out individual preliminary tests on the adhesion and the load-bearing capacity of the bond. Uncured adhesive can be removed from many surfaces and tools with water.
Characteristics:
High initial adhesion, no need to fix the materials to be bonded during curing
Excellent adhesion to all substrates commonly used in construction, such as wood, stone, concrete, plasterboard, gypsum, plaster, many plastics, wall tiles and metals
Moisture-resistant after hardening and can be painted over with water-soluble paints
Free from solvents, isocyanates and silicone
Odorless
Non-corrosive in contact with metals
Sandable after hardening
Can be painted over with emulsion paints
No adhesion to bitumen, PE, PP, PTFE or silicone